|
|
|
The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical
springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is
developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of a spring.
- Selection of an optimal alternative of spring design in view of strength, geometry and weight.
- Static and dynamic strength check.
- Support for Cold formed springs and Hot formed springs
- Calculation of working forces of a spring of known production and installation dimensions.
- Calculation of installation dimensions for known loading and production parameters of the spring.
- The application includes a table of commonly used spring materials according to ISO, ASTM/SAE, DIN, BS, JIS
and others.
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
The calculation is based on data, procedures, algorithms and data from specialized literature and standards EN
13906-1, DIN 2089-1, DIN 2095, DIN 2096.This module is a part of MITCalc - Mechanical and Technical
Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection,
tolerances and many others.
|
|
|
DIN 3975-1
DIN 2089-2
DIN 3990
DIN 2215
DIN 743
DIN 2097
DIN 2089-1
DIN 7721
-------------------------
|
|
The calculation is to be used for geometrical and strength design of metal springs of various types and designs,
subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and
Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round wires and bars
- Helical cylindrical compression springs of rectangular wires and bars
- Helical conical compression springs of round wires and bars
- Helical conical compression springs of rectangular wires and bars
- Belleville springs
- Helical cylindrical tension springs of round wires and bars
- Helical cylindrical tension springs of rectangular wires and bars
- Spiral springs
- Helical cylindrical torsion springs made of round wires a bars
- Helical cylindrical torsion springs made of rectangular wires and bars
- Torsion bar springs with round section
- Torsion bar springs with rectangular section
- Leaf springs with constant profile
- Leaf springs with parabolic profile
- Laminated leaf springs
2) Automatic proposal (finding) of a spring with suitable dimensions.
3) Static and dynamic strength check.
The application includes a table of commonly used spring materials according to EN, ASTM/SAE, DIN, BS, JIS,
UNI, SIS, CSN and others. The calculation is based on data, procedures, algorithms and data from specialized
literature and standards EN 13906, DIN 2088, DIN 2089, DIN 2090, DIN 2091, DIN 2092, DIN 2093, DIN 2095,
DIN 2096, DIN 2097. This module is a part of MITCalc - Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
MITCalc - Compression Springs: http://www.mitcalc.com/download/MITCalcSprComp01.exe
MITCalc - Springs - 15 types: http://www.mitcalc.com/download/MITCalcSprings01.exe |
|
Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of gearing dimensions.
- Automatic transmission design with minimum input requirements.
- Design for safety coefficients entered.
- Calculation of a table of proper solutions.
- Calculation of complete geometrical parameters.
- Calculation of strength parameters, safety check.
- Gearing design for precise centre-line distance.
- Auxiliary calculations (heating, shaft design).
- Support of 2D and 3D CAD systems.
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E). The calculations use procedures,
algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature. Used standards: ANSI/AGMA 6022-C93 (Revision of AGMA 341.02), ANSI/AGMA 6034-B92 (Revision of ANSI/AGMA 6034-A87), DIN 3996, DIN 3975-1, DIN 3975-2 and others. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
MITCalc - Worm Gear Calculation: http://www.mitcalc.com/download/MITCalcWGear01.exe
|
|
|
|