|
|
|
Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.
Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive.
Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.
RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping".
Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.
The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.
|
|
|
RAID 0 recovery specialists
find broken links
broken link checker
recupero dati raid
broken connection
broken tape recovery
RSA Challenge Keys broken
Raid 6 Recovery Software
-------------------------
|
|
RAID Reconstructor: http://www.runtime.org/raid.zip
|
|
Recover corrupted RAID arrays in a fully automatic mode. Raid Recovery is the first tool to automatically detect the type of the original RAID array while still allowing for fully manual operation. Raid Recovery is no doubt a highly valuable tool for users of all types of RAID arrays, whether hardware, native, or software. The drag-and-drop user interface allows specifying parts of the RAID array by simply dragging and dropping icons representing the disks.
Reconstruct all types of arrays just as easily as a single hard disk. Raid Recovery recognizes all imaginable configurations of various types of arrays, including RAID 0, 1, JBOD, RAID 5, and 0+1, no matter whether they are connected to a dedicated RAID controller or a RAID-enabled motherboard from NVidia, Intel, or VIA. Microsoft software raids (also called Dynamic Disks) are also supported, including JBOD (span), RAID 0, 1, and 5 configurations.
Detecting the right type of an array is vital for correct recovery. Raid Recovery supports both manual and fully automatic detection of essential parameters such as type of array, type of RAID controller, stripe size, and disk order.
Assemble RAID configurations manually via a simple drag-and-drop operation. Raid Recovery re-constructs an array from the available hard disks being simply dragged and dropped, and detects the right type and size or the array as well as the order of the disks automatically. Anyone can recover broken RAID arrays with Raid Recovery!
Raid Recovery gives top priority to your data, allowing you to recover and back up all files from the corrupted array before attempting to fix it. You can store the files on another hard disk or partition, use a recordable CD or DVD, or even upload the files over FTP. Raid Recovery uses advanced search algorithms that allow recovering important files such as documents, pictures and multimedia even if there is a missing disk in the array, or if the file system is missing or damaged.
DiskInternals Raid Recovery: http://diskinternals.com/download/Raid_Recovery.exe
|
|
|
|