Download Online App Box . SERIAL DATA CONVERTER, SERIAL OVER ETHERNET
datAxe is a flexible converter to solve all your needs between serial data and TCP/IP networks on Windows computers. datAxe software package makes serial data from your PC available on TCP/IP-based networks and makes TCP/IP data available on physical and virtual serial ports of your PC. datAxe supports two transport data stream protocols: Raw Connection and Telnet datAxe supports full two-way I/O for full control of serial instruments (i.e. any instrument that you can plug into the serial port (RS232, RS422 or RS485) of your PC) to make them part of your local area network (LAN) or internet. Thus you can send and receive serial data between remote computers, devices and applications. With datAxe you can also create virtual ports and configure them to communicate with TCP/IP-networks. duplAxe component of datAxe makes it possible to build and start up virtual serial port pairs (COM port pairs) to enable also your local applications to exchange serial data directly with each other. The main utility of datAxe, the Comport application allows any other computer on the same network to send and receive serial data through a remote serial port on the PC where Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port. Comport can also be used to pass serial data across a corporate intranet or over the Internet. Comport allows multiple sessions to run simultaneously but each with different serial port.

  

Advanced serial port monitor

publish data as Word

free calling over Internet

usb over ethernet

advanced serial port terminal

36-image converter

USB over IP Network

ethernet network

 

-------------------------

 

 

datAxe TCP IP serial data converter: http://www.labf.com/download/dataxe.exe

 

Serial over Ethernet allows you to share up to 255 serial port devices over a TCP/IP network turning your computer into a low-cost terminal server. As a result, any serial port device connected to a COM port could be accessed from anywhere in the world as if it were attached to the local PC. When the attached serial port device sends communication data, it will actually be transmitted over a TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In this case, the Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (the number of physical ports you have) per system and can create COM port connections without occupying a real serial port. Serial over Ethernet provides the ability to create several connection types for three main purposes: share serial port for incoming connections (Server), connect serial port to remote host (Client) and share serial port using UDP. Starting from version 5.0, all SEC internal drivers for Windows Vista and Server 2008 are digitally signed by Microsoft. 

Serial over Ethernet: http://www.virtualserialport.com/download/se_connector.exe

Serial to Ethernet Connector: http://www.eltima.com/download/serial_ethernet_connector.exe

Serial to Ethernet Connector is an advanced software solution developed to share serial port devices over TCP/IP network. Thus, any serial port device connected to COM port at local PC could be accessed from anywhere in the world via internet, for example. When the attached serial port device sends communication data it will be actually transmitted over TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In that case Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (any number of physical ports you have) per system and may create COM port connections without occupying any real serial port. Formerly known as VSPD.Net, Serial to Ethernet Connector has a completely new interface and greatly revamped engine. It allows you to use three different types to connect to remote computer. The first type is port-to-port connection, which lets you connect two computers through TCP/IP network. In this way you can emulate virtual null-modem cable connection. Serial to Ethernet Connector allows you to customize remote serial port settings locally or dynamically fetch these settings from the remote end. Second type is the port-to-TCP client, which allows you to connect to remote server and send/receive communication serial data over TCP/IP network. Once connection is established, all data sent from remote serial port device, attached to the server, will be genuinely delivered to local serial port where it can be further processed. The last type is the port-to-TCP server which allows you establish multiple connections to local serial port device and redistribute COM port device data all over the world. Server listens to all incoming connections at the defined TCP port and redirects input/output serial data to TCP/IP network. Serial to Ethernet Connector can be easily configured for current demands. 

Copyright © Online App Box (onlineappbox.com), All rights reserved.